Columbia Controls Inc.

Only 10 left!


For fail-safe, modulating control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. The actuator is mounted directly to a damper shaft from 1/4” up to 1/2” in diameter by means of its universal clamp, 1/2” shaft centered at delivery. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. The actuator operates in response to a 2 to 10 VDC, or with the addition of a 500Ω resistor, a 4 to 20 mA control input from an electronic controller or positioner. A 2 to 10 VDC feedback signal is provided for position indication.


  • Torque: 22 in-lb [2.5 Nm]
  • Voltage AC/DC: AC/DC
  • Angle of Rotation: 95°
  • Direction of Rotation (Fail-Safe): Reversible with cw/ccw mounting
  • Shaft Diameter 1/4...1/2" round centers on 1/2"
  • Actuator Type: Spring return
  • Auxiliary Switches: 1 SPDT
  • Application: Air
  • Control Type: Modulating
  • Degree of Protection: IP42, NEMA 2, UL Enclosure Type 2
  • Running Time (Fail-safe):<25 s
  • Running Time (Motor): 95 s constant independent of load